My old worn MT350 with some mods

Post Reply
KarlR

My old worn MT350 with some mods

Post by KarlR » Mon Apr 04, 2011 8:43 pm

Image
Image Image
Image
Image

Mikuni VM32
K+N
Big bore tailpipe
Wider , lowered footpegs
Hagon shocks
Plastic tank
CAN-AM Mudguards
Smaller rack
0 x

User avatar
Yoof
Posts: 1208
Joined: Mon Jul 12, 2010 8:42 pm
Location: West Yorkshire
Location: Huddersfield

Re: My old worn MT350 with some mods

Post by Yoof » Mon Apr 04, 2011 9:02 pm

Looks nice, liking the rear rack, out of interest wheres the battery? or are you not running one?
Nick
0 x
MT560e
BMW R75/5
Honda CB250rs
MZ TS250
BSA M20

Green Goblin

Re: My old worn MT350 with some mods

Post by Green Goblin » Tue Apr 05, 2011 6:54 am

Do you know what jets are in the Mikuni?
0 x

Mr Shiney

Re: My old worn MT350 with some mods

Post by Mr Shiney » Tue Apr 05, 2011 9:48 am

nickp500 wrote:Looks nice, liking the rear rack, out of interest wheres the battery? or are you not running one?
Nick
Looks like the battery box is still there.
0 x

appyarry
Posts: 1526
Joined: Wed Jan 12, 2011 9:39 pm
Location: Lyminge, Kent.

Re: My old worn MT350 with some mods

Post by appyarry » Tue Apr 05, 2011 6:42 pm

Nice Bike, where did you get the hand guards? Are they plastic?

Ta.
0 x
Serveta Jet 200
Triumph Tigress 250
BSA C15 to be rebuilt as Scrambler
Sinclair Goddard PowerPak
Kalkhoff Endeavour 11 Speed Hub

KarlR

Re: My old worn MT350 with some mods

Post by KarlR » Thu Apr 07, 2011 9:33 am

The handguards are plactic and came off flea-bay , second hand and cheap !!! , not sure what they fitted before.

The battery is still there in the normal place .

The mikuni was supposed to be "fit straight from the box " , however its suffering from the poor starting from cold problem . It wont start or run with any choke on , but wont rev past idle until the engines really warmed up , meaning cold starts take 5 mins before u can get going . It really needs the jet mods doing that so many discus on this forum . However when its warmed up , the carb + exhaust make it go pretty well , although the air intake noise and tailpipe do make it pretty noisy . Thats why I fit the orginal tailpipe for MOT day !!! .

I rally love the old MT , Its a great bike for plodding around the country lanes of east anglia , I also like the fact its happy being scruffy , and its also great for home engineers to work on . One of the favourite weezes is turning up to local bike shows and parking it up in the HD section alongside those chrome plated show ponies . Its always guarenteed to cause a stir . I once turned up on it at the Henham steam rally , went to pay at the entrance only to be waved through because they thought I was part of the Milatary vehicle display .

Longer term I want to fit a 500e engine in it , just need to save up. !!!!!!
0 x

Mr Shiney

Re: My old worn MT350 with some mods

Post by Mr Shiney » Thu Apr 07, 2011 10:42 am

I gave up on the Mikuni for the same problem you are having. The original CV carb with a 42/160 and the mods runs like a sewing machine now.

I alos put the 500e into mine and have been very pleased with it. Nice grunt, good for a ton with your tits on the tank and a strong enough nerve!! It will cruise all day at 75-80 but the gobble fuel compared to the 350. I get around 40mpg as an average.

However I do love the MT. I use it daily to get to the train station and green laning. I was on the lanes last night and rode to the train station this morning with it covered in mud!!
0 x

Post Reply

Who is online

Users browsing this forum: No registered users and 93 guests