Finished rebuild and back on the road
-
- Posts: 101
- Joined: Wed Feb 10, 2010 8:56 pm
- Location: Edinburgh
- Location: Edinburgh
Re: Finished rebuild and back on the road
Well done on the rebuild, really novel look.
If your carbs running lean you could drill out the plug and access the master air/fuel mixture screw. there is a blanked out plug that covers it on the bottom front end of the carb.
Ive just done this with info here and on harley websites (our carb is the same as the sportster 883).
I did it yesterday and running has been much better - more top end and I didn't need the idle screw so far in.
Donald
If your carbs running lean you could drill out the plug and access the master air/fuel mixture screw. there is a blanked out plug that covers it on the bottom front end of the carb.
Ive just done this with info here and on harley websites (our carb is the same as the sportster 883).
I did it yesterday and running has been much better - more top end and I didn't need the idle screw so far in.
Donald
0 x
Re: Finished rebuild and back on the road
Absolutely Love it!!!
Make sure you don't park it somewhere and lose it with that camo job....
Make sure you don't park it somewhere and lose it with that camo job....
0 x
- jimmynomates
- Posts: 197
- Joined: Tue May 04, 2010 9:04 pm
- Location: hartlepool
Re: Finished rebuild and back on the road
They are classed as show plates so it's a case of take your chance on a fine if you get pulled by a jobsworth I do carry both yellow and black as you can see on the last pic it's got yellow on but still three line I get them here
http://funplates.co.uk/" onclick="window.open(this.href);return false;
http://funplates.co.uk/" onclick="window.open(this.href);return false;
Mr Shiney wrote:Where do you get those number plates from?
Last edited by jimmynomates on Mon Jul 25, 2011 10:22 am, edited 2 times in total.
0 x
Yamaha MT 09 Tracer
HD MT350 with Canadian 500e Motor
HD MT350 with Canadian 500e Motor
- jimmynomates
- Posts: 197
- Joined: Tue May 04, 2010 9:04 pm
- Location: hartlepool
Re: Finished rebuild and back on the road
Thanks Donald I will try that
Jim...
Jim...
rustyspanner wrote:Well done on the rebuild, really novel look.
If your carbs running lean you could drill out the plug and access the master air/fuel mixture screw. there is a blanked out plug that covers it on the bottom front end of the carb.
Ive just done this with info here and on harley websites (our carb is the same as the sportster 883).
I did it yesterday and running has been much better - more top end and I didn't need the idle screw so far in.
Donald
0 x
Yamaha MT 09 Tracer
HD MT350 with Canadian 500e Motor
HD MT350 with Canadian 500e Motor
- jimmynomates
- Posts: 197
- Joined: Tue May 04, 2010 9:04 pm
- Location: hartlepool
Re: Finished rebuild and back on the road
Thanks guys for all the comments I think it will be just about impossible to go out without being spotted,
sort of makes my urban cammo a bit pointless
The paint, Madstu was done by using gravity fed touch up guns Ă‚ÂŁ12 each inc. free delivery and it is a joint effort by my friend Tim and me but he is the artistic one and it is a first attempt for us both
Once again I very much appreciate the great feedback from all you guys makes the effort seem even more worthwile
Cheers Jim...
sort of makes my urban cammo a bit pointless
The paint, Madstu was done by using gravity fed touch up guns Ă‚ÂŁ12 each inc. free delivery and it is a joint effort by my friend Tim and me but he is the artistic one and it is a first attempt for us both
Once again I very much appreciate the great feedback from all you guys makes the effort seem even more worthwile
Cheers Jim...
woodruff wrote:Not my cup of tea whatsoever.....But I love it
Those eyeball post will be easy in your area!
0 x
Yamaha MT 09 Tracer
HD MT350 with Canadian 500e Motor
HD MT350 with Canadian 500e Motor
Who is online
Users browsing this forum: No registered users and 25 guests