Anouther 604 is almost done
Anouther 604 is almost done
I ,ve had a bit of a push and this is how the bike looks now. It has been built out of assorted parts and is a mixture of 350 and 500 bits. This has caused me some problems, most of which have been overcome. The observant amongst you will notice the 604 engine, Apophis, exhaust system and 36mm Dellorto carb. The 350 front rim and 500 rear are wearing Heidenau tyres.
The bike has been built to replace my 500 as general winter runabout, ( my Norton doesn't like salt) and as such will not be as pristine as some, hopefully a couple of months should see it finished.
The only thing I,m not happy with is the shade of green, it looked different on the chart, but there again beeing green colourblind doesn't help !!!!!!.
The bike has been built to replace my 500 as general winter runabout, ( my Norton doesn't like salt) and as such will not be as pristine as some, hopefully a couple of months should see it finished.
The only thing I,m not happy with is the shade of green, it looked different on the chart, but there again beeing green colourblind doesn't help !!!!!!.
0 x
When you grow up you grow old. Top tip, " never grow up"
MT 500 "Inky" (short for incontinent), not now Minter,s sorted it
1936 Bsa R4
1961 Triumph Trophy
1966 Norton N15CS
1971 Laverda SF
MT 500 "Inky" (short for incontinent), not now Minter,s sorted it
1936 Bsa R4
1961 Triumph Trophy
1966 Norton N15CS
1971 Laverda SF
Re: Anouther 604 is almost done
Looking triffic Vaughan.
0 x
HD MT500e 'Bunk'
HD MT604e MTourer project
You don't need a parachute to skydive. You only need a parachute to skydive twice.
HD MT604e MTourer project
You don't need a parachute to skydive. You only need a parachute to skydive twice.
Re: Anouther 604 is almost done
I popped round to see Digger last night and can confirm that his bike, is indeed, a thing of beauty. I'm now making plans for some serious garage time to get mine to the same stage.
Stuart
Stuart
0 x
Re: Anouther 604 is almost done
i like how the gaters on the rear shocks don't look out of place! looks like a very tidy build on the go there
0 x
Re: Anouther 604 is almost done
oooo I didn't notice the gaitors on the first look, great idea.
Do they keep all the dirt out, as the ones on Piglet are showing some serious signs of abrasion going on there.
As for the rebuild, hope it's going well, coz it looks lovely see innit.
I just couldn't dirty something that looks that immaculate and I think alot of people have that problem once completing something like this (cars/bikes/whatever)
My conversion was nowhere near as asthetically pleasing!
Cracking job, looking forward to seeing it.
Ady
Do they keep all the dirt out, as the ones on Piglet are showing some serious signs of abrasion going on there.
As for the rebuild, hope it's going well, coz it looks lovely see innit.
I just couldn't dirty something that looks that immaculate and I think alot of people have that problem once completing something like this (cars/bikes/whatever)
My conversion was nowhere near as asthetically pleasing!
Cracking job, looking forward to seeing it.
Ady
0 x
MT 604 - bits of allsorts, CCM,, Brembo, hagon
Re: Anouther 604 is almost done
Great job! This is exactly the spec that armstrong should have built back in 1985! A proper bike with a proper engine and proper brakes... I'd love to one exactly the same some time..........
0 x
SPORTAX Racing ROTAX
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link
Re: Anouther 604 is almost done
Good job its not a Land Rover or this thread would be full of legal advice! Im looking forward to seeing it in the week.It has been built out of assorted parts and is a mixture of 350 and 500 bits
0 x
HD MT500e 'Bunk'
HD MT604e MTourer project
You don't need a parachute to skydive. You only need a parachute to skydive twice.
HD MT604e MTourer project
You don't need a parachute to skydive. You only need a parachute to skydive twice.
Re: Anouther 604 is almost done
I'll get as much advice as i can before i start that project then!Bunker wrote:Good job its not a Land Rover or this thread would be full of legal advice! Im looking forward to seeing it in the week.It has been built out of assorted parts and is a mixture of 350 and 500 bits
0 x
SPORTAX Racing ROTAX
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link
Who is online
Users browsing this forum: No registered users and 15 guests