Anouther 604 is almost done

digger
Posts: 324
Joined: Thu Jan 15, 2009 8:57 pm
Location: Nuneaton, Warwickshire.

Anouther 604 is almost done

Post by digger » Mon Aug 30, 2010 2:48 pm

I ,ve had a bit of a push and this is how the bike looks now. It has been built out of assorted parts and is a mixture of 350 and 500 bits. This has caused me some problems, most of which have been overcome. The observant amongst you will notice the 604 engine, Apophis, exhaust system and 36mm Dellorto carb. The 350 front rim and 500 rear are wearing Heidenau tyres.
The bike has been built to replace my 500 as general winter runabout, ( my Norton doesn't like salt) and as such will not be as pristine as some, hopefully a couple of months should see it finished.
The only thing I,m not happy with is the shade of green, it looked different on the chart, but there again beeing green colourblind doesn't help !!!!!!.

Image

Image

Image
0 x
When you grow up you grow old. Top tip, " never grow up"

MT 500 "Inky" (short for incontinent), not now Minter,s sorted it :D :D
1936 Bsa R4
1961 Triumph Trophy
1966 Norton N15CS
1971 Laverda SF

User avatar
Bunker
Site Admin
Posts: 3500
Joined: Mon Oct 06, 2008 8:42 pm
Location: Newbury, Berkshire

Re: Anouther 604 is almost done

Post by Bunker » Mon Aug 30, 2010 9:07 pm

Looking triffic Vaughan.
0 x
HD MT500e 'Bunk'
HD MT604e MTourer project


You don't need a parachute to skydive. You only need a parachute to skydive twice.

woodruff

Re: Anouther 604 is almost done

Post by woodruff » Tue Aug 31, 2010 5:56 am

Yep - jealousy here to...
0 x

User avatar
morpheus
Posts: 740
Joined: Mon Oct 20, 2008 5:43 pm
Location: Salisbury
Contact:

Re: Anouther 604 is almost done

Post by morpheus » Tue Aug 31, 2010 7:29 am

Lookin' good!

Well done

Morpheus
0 x

green_machine

Re: Anouther 604 is almost done

Post by green_machine » Fri Sep 03, 2010 1:49 pm

I popped round to see Digger last night and can confirm that his bike, is indeed, a thing of beauty. I'm now making plans for some serious garage time to get mine to the same stage.

Stuart
0 x

fdph

Re: Anouther 604 is almost done

Post by fdph » Sun Jan 16, 2011 8:56 pm

i like how the gaters on the rear shocks don't look out of place! looks like a very tidy build on the go there
0 x

User avatar
MT Pocket
Posts: 735
Joined: Tue Nov 03, 2009 10:48 am
Location: S Wales
Location: The 'dark' side

Re: Anouther 604 is almost done

Post by MT Pocket » Sun Jan 16, 2011 9:06 pm

oooo I didn't notice the gaitors on the first look, great idea.
Do they keep all the dirt out, as the ones on Piglet are showing some serious signs of abrasion going on there.

As for the rebuild, hope it's going well, coz it looks lovely see innit.
I just couldn't dirty something that looks that immaculate and I think alot of people have that problem once completing something like this (cars/bikes/whatever)
My conversion was nowhere near as asthetically pleasing!

Cracking job, looking forward to seeing it.

Ady
0 x
MT 604 - bits of allsorts, CCM,, Brembo, hagon

User avatar
Minter
Posts: 5696
Joined: Sun May 30, 2010 7:42 pm
Location: Boston, Lincolnshire

Re: Anouther 604 is almost done

Post by Minter » Sun Jan 16, 2011 9:14 pm

Great job! This is exactly the spec that armstrong should have built back in 1985! A proper bike with a proper engine and proper brakes... I'd love to one exactly the same some time.......... :)
0 x
SPORTAX Racing ROTAX
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link

User avatar
Bunker
Site Admin
Posts: 3500
Joined: Mon Oct 06, 2008 8:42 pm
Location: Newbury, Berkshire

Re: Anouther 604 is almost done

Post by Bunker » Sun Jan 16, 2011 9:39 pm

It has been built out of assorted parts and is a mixture of 350 and 500 bits
Good job its not a Land Rover or this thread would be full of legal advice! Im looking forward to seeing it in the week.
0 x
HD MT500e 'Bunk'
HD MT604e MTourer project


You don't need a parachute to skydive. You only need a parachute to skydive twice.

User avatar
Minter
Posts: 5696
Joined: Sun May 30, 2010 7:42 pm
Location: Boston, Lincolnshire

Re: Anouther 604 is almost done

Post by Minter » Sun Jan 16, 2011 9:44 pm

Bunker wrote:
It has been built out of assorted parts and is a mixture of 350 and 500 bits
Good job its not a Land Rover or this thread would be full of legal advice! Im looking forward to seeing it in the week.
:lol: :lol: I'll get as much advice as i can before i start that project then! :lol:
0 x
SPORTAX Racing ROTAX
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link

Post Reply

Who is online

Users browsing this forum: No registered users and 66 guests