One of the New Zealand MT350's Bit of a clean up

Raglan Bach · Post by **Raglan Bach** » Fri Jan 08, 2016 6:18 am

Thought I might have a go at this Blog thing. Its all very new to me. My 1st time
So here it is a blog on my MT350 in New Zealand

http://mt350harleydavidson.weebly.com/blog

Flying Dutchman · Post by **Flying Dutchman** » Fri Jan 08, 2016 12:43 pm

Nice blog!
I really liked reading it.
Greetings from Zeeland. (Old-Zealand)

gegdonnell · Post by **gegdonnell** » Sat Jan 09, 2016 9:39 pm

Nice to see the progress Richard, you will become more familiar with these beasts. Then you'll be starting your other MT maybe.

Raglan Bach · Post by **Raglan Bach** » Sun Jan 10, 2016 3:43 am

Ever struggled wit fitting the main stand springs
Well right or wrong I came up with a cunning plan how to do it today
Have put the video on my Blog
http://mt350harleydavidson.weebly.com/blog

Raglan Bach · Post by **Raglan Bach** » Sun Jan 10, 2016 7:34 am

Flying Dutchman wrote:Nice blog!
I really liked reading it.
Greetings from Zeeland. (Old-Zealand)

Thanks Jan
for you supportive comment
I loved the Nederlands. You would love the NZ

Minter · Post by **Minter** » Sun Jan 10, 2016 7:37 am

Nice one Richard, that worked a treat!

I go for the less finesse approach by laying the bike on its side and using a spring puller! Cheers for the link! Has the chain slipper arrived yet?

Andi_Archer · Post by **Andi_Archer** » Sun Jan 10, 2016 10:42 am

After taking mine off last week I was struggling to find a way to get them on but after seeing Mr Smileys solution I came up one that worked for me.Fitting the spring to the top eyelet I used a wire strap from the bottom spring eye around a car scissor jack and back,the jack was supported across the swing arm frame with a chock of wood and just stretched it to the right length then used a screwdriver to just position it correctly before lossening the tension.
A tad Heath Robinson but it worked.

Raglan Bach · Post by **Raglan Bach** » Wed Jan 13, 2016 5:43 am

Minter wrote:Nice one Richard, that worked a treat!

I go for the less finesse approach by laying the bike on its side and using a spring puller! Cheers for the link! Has the chain slipper arrived yet?

Hey it arrived early this morning. That is Wednesday 13/01/2016
That is pretty impressive one week to get here
I've ordered stuff from Auckland one and a half hours away, that has taken longer

Minter · Post by **Minter** » Wed Jan 13, 2016 7:20 am

Raglan Bach wrote:
Minter wrote:Nice one Richard, that worked a treat!

I go for the less finesse approach by laying the bike on its side and using a spring puller! Cheers for the link! Has the chain slipper arrived yet?
Hey it arrived early this morning. That is Wednesday 13/01/2016
That is pretty impressive one week to get here
I've ordered stuff from Auckland one and a half hours away, that has taken longer

Good news Richard.. the record so far is 4 days but that was to Australia so pretty local!

jamba · Post by **jamba** » Sat Jan 16, 2016 9:50 am

Nice blog!
Greetings from opposite side of earth

-18 degrees now...

MT Riders Club

One of the New Zealand MT350's Bit of a clean up

One of the New Zealand MT350's Bit of a clean up

Re: One of the New Zealand MT350's Bit of a clean up

Re: One of the New Zealand MT350's Bit of a clean up

Re: One of the New Zealand MT350's Bit of a clean up

Re: One of the New Zealand MT350's Bit of a clean up

Re: One of the New Zealand MT350's Bit of a clean up

Re: One of the New Zealand MT350's Bit of a clean up

Re: One of the New Zealand MT350's Bit of a clean up

Re: One of the New Zealand MT350's Bit of a clean up

Re: One of the New Zealand MT350's Bit of a clean up

Who is online