Yep, No probs mate..MT Pocket wrote:Oh goodo, it would be interesting to get a printout from different carbs on the same engine to have proof of what's best/most powerful etc (subject to personal preference I know)Minter wrote:Looks Good mate.. lots of pipes and jets & Carbs to test me thinks!MT Pocket wrote:I'm going to pen this weekend in for the 21/22nd September, does this suit the members that were interested?
Gary was going to bring a range of jets/pipes etc
Gary can you bring a 500 rear wheel with smoothish rear tyre on for dyno?
Training/Dynojet day South Wales - 16/17th November 2013
Moderator: Event Co-ordinator
Re: Training/Dynojet day South Wales est late Sept
0 x
SPORTAX Racing ROTAX
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link
Re: Training/Dynojet day South Wales est late Sept
I'll have to change the dates for this meet as I'll be late back from Kandahar and now they want to send me to Bavaria to drink beer!
It'll have to go into November because we all want to do the Wye Valley meet too.
SO, 9/10th November depending on Gary's availability, ......wait out.
It'll have to go into November because we all want to do the Wye Valley meet too.
SO, 9/10th November depending on Gary's availability, ......wait out.
0 x
MT 604 - bits of allsorts, CCM,, Brembo, hagon
Re: Training/Dynojet day South Wales est late Sept
An extended summer holiday and now they want to send you to Bavaria and your getting paid, if I was a tax payer............
Hope it's going ok out there for you.
Hope it's going ok out there for you.
0 x
Be who you are and say what you feel because those that
matter don't mind and those that mind don't matter!
matter don't mind and those that mind don't matter!
Re: Training/Dynojet day South Wales est late Sept
New date set in permajelly! 16/17th Nov.
see ya all at Wye Valley- social event for me again.
people who want footrests/heatshields-- I'm on it.
see ya all at Wye Valley- social event for me again.
people who want footrests/heatshields-- I'm on it.
0 x
MT 604 - bits of allsorts, CCM,, Brembo, hagon
Re: Training/Dynojet day South Wales est late Sept
This is set now for 16/17th Nov. Moderators please amend heading
Topics to be covered include;
1. Bike set-up
2. Ruts
3. Adverse camber techniques
4. Getting stuck - avoidance/tips
5. Standing up -when and when not to
6. Cornering techniques
7. Logs/obstacles
8. Control whilst airborne (for a laugh)
+ anything else people can think of.
Dynojet available for those that require it, if not - just head off into the hills!
Topics to be covered include;
1. Bike set-up
2. Ruts
3. Adverse camber techniques
4. Getting stuck - avoidance/tips
5. Standing up -when and when not to
6. Cornering techniques
7. Logs/obstacles
8. Control whilst airborne (for a laugh)
+ anything else people can think of.
Dynojet available for those that require it, if not - just head off into the hills!
0 x
MT 604 - bits of allsorts, CCM,, Brembo, hagon
Re: Training/Dynojet day South Wales est late Sept
Cooooool!MT Pocket wrote:This is set now for 16/17th Nov. Moderators please amend heading
Topics to be covered include;
1. Bike set-up
2. Ruts
3. Adverse camber techniques
4. Getting stuck - avoidance/tips
5. Standing up -when and when not to
6. Cornering techniques
7. Logs/obstacles
8. Control whilst airborne (for a laugh)
+ anything else people can think of.
Dynojet available for those that require it, if not - just head off into the hills!
How much will a dyno run be?
0 x
SPORTAX Racing ROTAX
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link
Re: Training/Dynojet day South Wales est late Sept
At most places a single Dyno run and analysis would cost Ă‚ÂŁ40ish
Dean says we can book it for half a day for Ă‚ÂŁ200 so splitting it would work out cheaper and we'd get as many runs as necessary to get the optimum on each bike.
I'm hoping for at least 5 takers on this so it's not expensive.
Dean has just smashed himself up, hitting a fence post at full whack whilst off-road but he says he will be back at work in a supervisory capacity by 16th Nov.
There is still some 'Pyrenees Wine' left and a Chillie will be on the hob for us all to scoff after riding.
Dean says we can book it for half a day for Ă‚ÂŁ200 so splitting it would work out cheaper and we'd get as many runs as necessary to get the optimum on each bike.
I'm hoping for at least 5 takers on this so it's not expensive.
Dean has just smashed himself up, hitting a fence post at full whack whilst off-road but he says he will be back at work in a supervisory capacity by 16th Nov.
There is still some 'Pyrenees Wine' left and a Chillie will be on the hob for us all to scoff after riding.
0 x
MT 604 - bits of allsorts, CCM,, Brembo, hagon
Re: Training/Dynojet day South Wales est late Sept
Not the wine that comes in cardboard cartons .......? Noooooooooooo!
I'll bring the 350 with the mikuni aquired from Minter to go with the free flowing pipe
I'll bring the 350 with the mikuni aquired from Minter to go with the free flowing pipe
0 x
Re: Training/Dynojet day South Wales est late Sept
Any more for this event?
We only have three for the dyno as Dave is unavailable.
We only have three for the dyno as Dave is unavailable.
0 x
MT 604 - bits of allsorts, CCM,, Brembo, hagon
Re: Training/Dynojet day South Wales est late Sept
I'm up for dynoMT Pocket wrote:Any more for this event?
We only have three for the dyno as Dave is unavailable.
0 x
MT560e
BMW R75/5
Honda CB250rs
MZ TS250
BSA M20
BMW R75/5
Honda CB250rs
MZ TS250
BSA M20
Who is online
Users browsing this forum: No registered users and 76 guests