Full Flow Stainless Exhaust Link Pipe

Post by **kaZeta** » Wed Feb 20, 2013 9:30 am

Is there a difference with these (full flow) and your previous offer (full bore) link pipes?
I got a separate end can and looking for one of these for my 560 engine.
I take it you're the only one offering these, as Force only has them already attached to the 'default' end cans...

Also, would the rest of my old 350 pipe set fit on your link pipe? (thinking the only difference between 350 and 500 exhaust is restrictions in the can?)
I'll replace all of these afterwards anyways, but a complete set is a bit too rich for my wallet at the moment.

TA

Minter · Post by **Minter** » Wed Feb 20, 2013 12:59 pm

kaZeta wrote:Is there a difference with these (full flow) and your previous offer (full bore) link pipes?
I got a separate end can and looking for one of these for my 560 engine.
I take it you're the only one offering these, as Force only has them already attached to the 'default' end cans...

Also, would the rest of my old 350 pipe set fit on your link pipe? (thinking the only difference between 350 and 500 exhaust is restrictions in the can?)
I'll replace all of these afterwards anyways, but a complete set is a bit too rich for my wallet at the moment.

TA

Hi Kazeta yes full bore/full flow same thing. They fit the standard centre pipe and any 45mm slip on silencer/race can etc..

I am the only one offering these at present, I have some being manufactured now and am taking orders for the next batch..

Gary

Post by **kaZeta** » Wed Feb 20, 2013 1:41 pm

Thanks for the reply, I'll measure soon and confirm if needed.

Minter · Post by **Minter** » Fri Mar 01, 2013 10:07 pm

Picked up the new batch of link pipes today - except yours Roy as the wrong end had been flared! All those who placed orders can let me know your addresses and i'll get them in the post to you..

Roy can you let me have the Inside Diameter of the silencer slip on you wish to fit.. The link pipe will then be flared so that the silencer fits over the link pipe - as they do for the 45mm link pipes..

Also BREAKING NEWS for 604 enthusiasts wishing to fit a BIG BORE SYSTEM! I will have prices for these next week and will then take orders accordingly..

benspray · Post by **benspray** » Fri Mar 01, 2013 10:16 pm

wow thats good timing, I just bought an end can less than an hour ago!!
PM sent with address

Cheers
Ben

benspray · Post by **benspray** » Mon Mar 04, 2013 10:03 am

Hi Gary,

Pipe turned up today thanks

and also my end can so hopefully get it all fitted soon.

Cheers
Ben

Minter · Post by **Minter** » Mon Mar 04, 2013 11:26 am

benspray wrote:Hi Gary,

Pipe turned up today thanks
and also my end can so hopefully get it all fitted soon.

Cheers
Ben

No problem Ben..

Thumper · Post by **Thumper** » Mon Mar 04, 2013 12:03 pm

Ben

What Can did you get?

I'm looking for one but can't make up my mind....

benspray · Post by **benspray** » Mon Mar 04, 2013 12:19 pm

Hi,

Not allowed to link to ebay but if you search for oval CCM 45mm from a seller called powertechperformance its that stainless can, no idea how loud etc its going to be yet, hopefully not too loud!

Haven't offered it up yet to see if it fits but I figured an oval can has a good chance of fitting between the rear bar and the mudguard without too much messing about...

Cheers
Ben

Thumper · Post by **Thumper** » Mon Mar 04, 2013 1:40 pm

Thanks Ben

I'll check it out.

Let us know how you get on plus a photo if possible

Sent from my iPad using Tapatalk HD

MT Riders Club

Full Flow Stainless Exhaust Link Pipe

Re: Full Flow Stainless Exhaust Link Pipe

Re: Full Flow Stainless Exhaust Link Pipe

Re: Full Flow Stainless Exhaust Link Pipe

Re: Full Flow Stainless Exhaust Link Pipe

Re: Full Flow Stainless Exhaust Link Pipe

Re: Full Flow Stainless Exhaust Link Pipe

Re: Full Flow Stainless Exhaust Link Pipe

Re: Full Flow Stainless Exhaust Link Pipe

Re: Full Flow Stainless Exhaust Link Pipe

Re: Full Flow Stainless Exhaust Link Pipe

Who is online