Edinburgh Trial 6th Oct (In Derbyshire!)
Moderator: Event Co-ordinator
- arceye
- Posts: 2005
- Joined: Thu Jan 15, 2009 8:27 pm
- Location: Basingstoke Hampshire
- Location: Basingstoke
Re: Edinburgh Trial 6th Oct (In Derbyshire!)
I can let you know the times once i receive the road book.
Never done this Trial before so i dont have a clue what to expect.
Never done this Trial before so i dont have a clue what to expect.
0 x
Electric start conversions, Front Racks and Rear 350 Racks Fabricated to order.
MT 555,2 Armstrong projects,
2 CCM Armstrong projects.
MT 555,2 Armstrong projects,
2 CCM Armstrong projects.
Re: Edinburgh Trial 6th Oct (In Derbyshire!)
richard63 wrote:http://www.themotorcyclingclub.org.uk/
Its a saturday I only live 15 mins from Bamford Clough happy to meet at mine or somewhere in Derbyshire maybe Ladybower ?
Not sure what time vehicles are due this year, cant seem to find much info but last year it was 8.45 ish.Open to ideas could make day of it if anybody fancies it spin round Peaks in the afternoon.
For those that came out on the ride I set up the other year... Bamford is the lane of so much enjoyment!!!
http://www.youtube.com/watch?v=5nmczn-B ... ure=relmfu" onclick="window.open(this.href);return false;
Mel at 8:40....
Pete
0 x
MT350
- arceye
- Posts: 2005
- Joined: Thu Jan 15, 2009 8:27 pm
- Location: Basingstoke Hampshire
- Location: Basingstoke
Re: Edinburgh Trial 6th Oct (In Derbyshire!)
Hmmm That looks like hard work.
Plenty of dabs there i think.
Plenty of dabs there i think.
0 x
Electric start conversions, Front Racks and Rear 350 Racks Fabricated to order.
MT 555,2 Armstrong projects,
2 CCM Armstrong projects.
MT 555,2 Armstrong projects,
2 CCM Armstrong projects.
Re: Edinburgh Trial 6th Oct (In Derbyshire!)
The two guys who rode up it on MT's at last year's Edinburgh sailed up it no problem. One did have softer rear shocks, I seem to recallPlenty of dabs there i think
0 x
Re: Edinburgh Trial 6th Oct (In Derbyshire!)
Brilliant! Cant wait!
0 x
SPORTAX Racing ROTAX
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link
Re: Edinburgh Trial 6th Oct (In Derbyshire!)
Gary, Phil,
It might be worth touching base with Spanner Hands see thread, He rode it last year on an MT
http://forum.mtridersclub.co.uk/viewtop ... =edinburgh" onclick="window.open(this.href);return false;
Eric
It might be worth touching base with Spanner Hands see thread, He rode it last year on an MT
http://forum.mtridersclub.co.uk/viewtop ... =edinburgh" onclick="window.open(this.href);return false;
Eric
0 x
Re: Edinburgh Trial 6th Oct (In Derbyshire!)
Looks like a cracking event! Nice looking breakfast too!Wirralman wrote:Gary, Phil,
It might be worth touching base with Spanner Hands see thread, He rode it last year on an MT
http://forum.mtridersclub.co.uk/viewtop ... =edinburgh" onclick="window.open(this.href);return false;
Eric
Hope they'll be plenty of you joining us for this years Edinburgh!
0 x
SPORTAX Racing ROTAX
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link
Re: Edinburgh Trial 6th Oct (In Derbyshire!)
I have to say the Bamford lane is a bit of pot luck, sections of it are concrete, I had a bit to much weight over the front end and lost momentum, the rider behind me didn't... so a tail light lens was required. The main problem then was getting the bikes back up without going base over apex. It was just easier to turn round and take a full run at it again. The guys in the +2" lifted landys who were taking the piss had to take 2 shots at bits of it so we got to laugh at them too.
It really is a case of get the right gear and go!!!!
By the time we got to Stanage edge after that we were all well bushed!
Pete
It really is a case of get the right gear and go!!!!
By the time we got to Stanage edge after that we were all well bushed!
Pete
0 x
MT350
Re: Edinburgh Trial 6th Oct (In Derbyshire!)
Craigs video did make me smile! Good job Ady was there! Ive never seen Mel move so quick either! Just a shame he wasnt on his bike at the time!!TDIPower wrote:By the time we got to Stanage edge after that we were all well bushed!
0 x
SPORTAX Racing ROTAX
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link
- arceye
- Posts: 2005
- Joined: Thu Jan 15, 2009 8:27 pm
- Location: Basingstoke Hampshire
- Location: Basingstoke
Re: Edinburgh Trial 6th Oct (In Derbyshire!)
Thanks Eric. Spanner Hands and his mate helped me for a bit on the Lands End Trial as we started at the same time. Nice Guys.
Unfortunately i fell off on the first test and lost them.
I am hoping my weekend in Wales has improved my riding.
Unfortunately i fell off on the first test and lost them.
I am hoping my weekend in Wales has improved my riding.
0 x
Electric start conversions, Front Racks and Rear 350 Racks Fabricated to order.
MT 555,2 Armstrong projects,
2 CCM Armstrong projects.
MT 555,2 Armstrong projects,
2 CCM Armstrong projects.
Who is online
Users browsing this forum: No registered users and 136 guests