Big Meet 18 - May 2018, Peterborough

Moderator: Event Co-ordinator

Locked
MT DECKY
Posts: 23
Joined: Tue May 23, 2017 8:06 pm
Location: Southern Ireland

Re: Big Meet 18 - May 2018, Peterborough

Post by MT DECKY » Sun May 13, 2018 7:52 pm

Thats great lads, what i dont have is a crank locking bolt, have a spare belt, and i have looked at all the lessons on line, but theres nothing like getting your hands dirty. Looking at the forcast on the BBC tonight and the weather looks good for next weekend
0 x

User avatar
lardmarc
Posts: 816
Joined: Tue Jun 23, 2015 8:56 pm
Location: Newton Abbot

Re: Big Meet 18 - May 2018, Peterborough

Post by lardmarc » Sun May 13, 2018 8:43 pm

MT DECKY wrote:
Sat May 12, 2018 7:57 pm
I've never done one before and i need to be able to change one on my own.
You can do it without a crank locking bolt as long as your eyes work, Doddle.

https://www.youtube.com/watch?v=80CAG_lxIvY
0 x
“Human beings, who are almost unique in having the ability to learn from the experience of others, are also remarkable for their apparent disinclination to do so.” (Adams, 2009).

Wirralman
Posts: 4914
Joined: Fri Jan 16, 2009 9:45 am
Location: Wirral, Merseyside

Re: Big Meet 18 - May 2018, Peterborough

Post by Wirralman » Sun May 13, 2018 9:57 pm

lardmarc wrote:
Sun May 13, 2018 8:43 pm
MT DECKY wrote:
Sat May 12, 2018 7:57 pm
I've never done one before and i need to be able to change one on my own.
You can do it without a crank locking bolt as long as your eyes work, Doddle.

https://www.youtube.com/watch?v=80CAG_lxIvY
Yes you can do it without, but inadvisable to teach that approach in my view. I recall two youtube videos a few years ago covering the topic, one showed the mark on the lower pulley pointing upwards and the other pointing downwards. It was explained by a knowledgeable member that whilst the engine would run with belt fitted in either pulley position, one way made it considerably harder to start.
Joth's tutorial does it by the book
0 x

User avatar
lardmarc
Posts: 816
Joined: Tue Jun 23, 2015 8:56 pm
Location: Newton Abbot

Re: Big Meet 18 - May 2018, Peterborough

Post by lardmarc » Sun May 13, 2018 10:14 pm

Wirralman wrote:
Sun May 13, 2018 9:57 pm
One way made it considerably harder to start.
Yes. You can see how hard mine was to start.

It's a doddle once you know what you're doing, you don't need to make it complicated. Line it up, bung the belt on, leave.
0 x
“Human beings, who are almost unique in having the ability to learn from the experience of others, are also remarkable for their apparent disinclination to do so.” (Adams, 2009).

Wirralman
Posts: 4914
Joined: Fri Jan 16, 2009 9:45 am
Location: Wirral, Merseyside

Re: Big Meet 18 - May 2018, Peterborough

Post by Wirralman » Mon May 14, 2018 7:46 am

MT DECKY, some other things you may wish to think about
The 4 bolts securing the cambelt cover aren't all the same length Your starter motor may not work and may chew up a bolt trying to start the engine if bolts are incorrectly fitted

There is a small drain hole at the bottom of the cover plate You should ensure that this is not blocked A simple task when fitted on the bike if you know where to look When the plate is off you can easily find it Some owners have struggled to locate this when fitted on the bike

You may wish to take the opportunity to wipe dirt/ belt dust off the engine and inside of the cover plate

There is a rubber O-ring that fits into a slot on the engine It doesn't provide a total seal You may find that yours is compressed and needs to be renewed

Take the opportunity to inspect pulleys for wear If you notice that a new belt isn't fully seated, you might put a new pulley on your To Do list

Some will say these details are not worth considering, adopting the Break it n Fix it approach Preventative maintenance is boring but having to limp home or wait for a recovery truck is probably even more frustrating
0 x

MT DECKY
Posts: 23
Joined: Tue May 23, 2017 8:06 pm
Location: Southern Ireland

Re: Big Meet 18 - May 2018, Peterborough

Post by MT DECKY » Mon May 14, 2018 6:39 pm

Tanx for all the advice lads, i want to learn how to do all these small jobs its better then sitting on the side of the road thinking i should have done that job before i left, anyway there will be none of that this weekend, lol
0 x

User avatar
hounddog
Global Moderator
Posts: 2416
Joined: Sun Jul 26, 2009 3:15 pm
Location: Portsmouth, Hampshire

Re: Big Meet 18 - May 2018, Peterborough

Post by hounddog » Wed May 16, 2018 10:00 pm

Looking forward to the weekend .
If you're coming as a day visitor to the show please come and say hello always good to put faces to names .

Just a reminder the club shop will be available via Gary (Minter) , at the paddock after he finishes racing each day . Please bring cash to get your quality MTRC merchandise , (we regret we cannot we cannot do shop sales on tick ).

See you there , safe journey
0 x
Ian
------------------------------------

Harley Davidson MT350e
Armstrong MT500e
Armstrong MT500 - next project

Locked

Who is online

Users browsing this forum: No registered users and 1 guest