New (old) Member

Before you can go any further, you must make an short introductory post here. Once you have done that you will get full access.
Forum rules
Please write a quick introduction. Which MT do you have or which one are you yearning for!....

Once we have been introduced, one of the admin team will upgrade your registration to standard.

Please note that if you are joining only to sell something, even if its an MT, you MUST ask first or your post will be deleted.

All new members are required to complete their locations (approximate) in your Profile and you are welcome to add your position in the 'Phoogle' map. Full instructions below.

Users who post less than 1 post per month may find their registration removed, this is our housekeeping not being militant!

Persevere - we're worth it!

Any probs or questions, please email us using the 'Contact Us' button at the top of your page.
Skragan
Posts: 10
Joined: Sat Jun 17, 2017 11:32 am
Location: Germany

New (old) Member

Post by Skragan » Sat Jun 17, 2017 11:49 am

Hello out there,

my name is Alex and I've been active here roughly five years ago, when I received my MT350 from Vebeg and started working on it. Finally, it's ready now and we went to the TÜV with no luck, because we don't get specific data sheets.

Now I'm seeking assistance again and also some spares and it would be great, if someone could help. I already invested quite some money now and I can't drive! *sigh*

Was removed by housekeeping :)

Cheers from Oldenburg in Germany,

Alex
0 x

Wirralman
Posts: 4710
Joined: Fri Jan 16, 2009 9:45 am
Location: Wirral, Merseyside

Re: New (old) Member

Post by Wirralman » Sat Jun 17, 2017 12:00 pm

Welcome back

Yes after 5 years inactivity housekeeping would have cleared you

Put any requests for spares in the Wanted section

Good luck with registration Hoffentlich you will be successful
0 x

User avatar
trecce
Posts: 261
Joined: Sat Jan 17, 2009 9:45 am
Location: Jever, Germany

Re: New (old) Member

Post by trecce » Mon Jun 19, 2017 5:57 pm

Grüsse an Rastede...
ich habe dir heute eine Private Message bezüglich TÜV geschickt

Grüsse Trecce
0 x
two 94 MT350; 88 FXSTS; 95 XLH; 44 WL and a lot of iron and paper for them

Skragan
Posts: 10
Joined: Sat Jun 17, 2017 11:32 am
Location: Germany

Re: New (old) Member

Post by Skragan » Tue Jun 20, 2017 11:05 am

Hi Trecce,

keine bekommen - eventuell an den alten Account gegangen?

VG
Alex
0 x

User avatar
trecce
Posts: 261
Joined: Sat Jan 17, 2009 9:45 am
Location: Jever, Germany

Re: New (old) Member

Post by trecce » Wed Jun 21, 2017 1:11 pm

Don´t know - but you can call +494461 71605 oder +491724309677

Greetz trecce
0 x
two 94 MT350; 88 FXSTS; 95 XLH; 44 WL and a lot of iron and paper for them

User avatar
Derrick
Global Moderator
Posts: 2426
Joined: Sat Jun 27, 2009 7:47 pm
Location: Leighton Buzzard

Re: New (old) Member

Post by Derrick » Mon Jul 03, 2017 7:05 pm

Welcome back. Hope you get everything sorted.
0 x
1997 HD MT350
2002 Honda Pan European 1300

Skragan
Posts: 10
Joined: Sat Jun 17, 2017 11:32 am
Location: Germany

Re: New (old) Member

Post by Skragan » Mon Jul 03, 2017 7:17 pm

Hi,

thanks to trecce and some others I´ll hopefully be riding MT soon. It´s all ready, last parts are ordered (spring for main stand) and then it´s time to go to TüV... :)

Cheers,

Alex
0 x

Skragan
Posts: 10
Joined: Sat Jun 17, 2017 11:32 am
Location: Germany

Re: New (old) Member

Post by Skragan » Mon Apr 30, 2018 6:10 pm

Hallo allerseits,

endlich ist es soweit: Die MT wurde mal bewegt! :mrgreen:

Vielen Dank an trecce für die Tips und Unterstützung, an Holger in Etzel für‘s Schrauben und ForceMotorcycles für die Teile! Sie läuft prima und ich freue mich riesig :)

VG

Alex

Image
0 x

Wirralman
Posts: 4710
Joined: Fri Jan 16, 2009 9:45 am
Location: Wirral, Merseyside

Re: New (old) Member

Post by Wirralman » Mon Apr 30, 2018 6:46 pm

Good to hear that your bike on the road Alex Also well done Trecce
0 x

User avatar
Minter
Posts: 4270
Joined: Sun May 30, 2010 7:42 pm
Location: Faringdon, Oxfordshire

Re: New (old) Member

Post by Minter » Mon Apr 30, 2018 7:23 pm

Welcome back to the forum! Glad all is now well with your bike..

Gary
Sportax Racing
0 x
SPORTAX Racing ROTAX
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest